› Cutting Glass Circles

How To Use A Circle Cutter

Cut Perfect Circles First Time


This circle cutter is very easy to use. It only takes a couple of practice runs to get really good at it. If you start off with window glass then you won't waste any of your precious art glass.
The 5 minute video below shows you just how simple it is to use.


5 minute video showing how to use a circle cutter

Recommended Circle Cutter


I've tried other circle cutters but this German made Silberschnitt is the one I prefer.
This is partly because it has a strong suction cup that sticks to the glass and stays firmly in place when you're making your score. Other cheaper circle cutters don't have this cup.


Silberschnitt glass circle cutter

The Silberschnitt Pro Circle Cutter

This one has a 6-wheel cutting turret. When the wheels get a bit blunt, simply unscrew the turret to a brand new cutting wheel and off you go again! I haven't got through all six yet, they are very long-lasting.

The ruler is marked with both inches and centimetres so that you can cut the precise size you're after. You can cut circles from 2-1/2" to 24" with this particular cutter.

The Silberschnitt Pro Circle Cutter is the one I use and recommend.

Buy it here from Delphi Glass.


How To Cut A Glass Circle


Step 1 - Preparation


checking glass circle cutter

Checking there is enough glass to safely make score all the way around

- First you need to set the ruler measurements to the right size for your circle. Do this by unscrewing the ring just under the black knob and slide the cutter to the correct position on the ruler.

- Once you're happy with that you need to check that there is room all around the glass for the cutter to make a score. You don't want to get half way around and run out of space!
Put the suction pad in the middle of the glass (don't stick it yet) and gently swivel the cutter head all the way around.
You need about 1/2" gap to the edge of the glass otherwise it might break.

- When you're happy with the position, bend the lever on top of the suction pad. This creates the sucking action needed to stick the pad firmly to the glass.

- Make sure you have some oil on the wheel to lubricate it. You can do this with a Q-tip or an oil-soaked sponge. Now you're ready to go.


Step 2 - Making The Score


using a glass circle cutter

Making the circular score on the glass

- If you're a 'righty', hold the suction cup down with your left hand and start turning the turret around. Press lightly but consistently downwards as you go around. Your score needs to be even.

- Go all the way around, 'under' your left arm and until you hear a 'click' when you meet up with the beginning of the score. Stop immediately - you don't want to ruin the wheel by going over the score line.


Step 3 - Running The Score


running the circle score

Running the circle scoreline by pressing with thumbs

- Turn the glass over so that the scoreline is underneath. Press lightly around the score until you can see it opening up. You can do this with your thumbs or the rubber handles of your pliers.

- Now turn the glass over again so that the score is back on top.


Step 4 - Releasing The Circle


releasing a glass circle from the glass

Making scorelines to the edge of the glass to release the circle

- With your regular glass cutter you need to make a few scorelines from the circle to the edge of the glass. Start at the circle and work outwards to the edge as this will stop you overshooting and scoring into the circle.

- Line up your cut running pliers with the score and press gently but firmly. If your scorelines are good then each section should come out easily as you go.


perfect blue glass circle cut with circle cutter

Perfect glass circle that doesn't need grozing or grinding

That's all there is to it! One perfect glass circle that doesn't need grozing or grinding.

Did you know it's easy to cut circles in glass without a circle cutter? Here's a video showing you how.

 

 

Click to sign up and get your free 'Cutting Perfect Curves' eBook and the Everything Stained Glass Newsletter cutting perfect curves

 

 

We Welcome Your Comments

Let us know what you think about this page by leaving your comment below.


We are a participant in the Amazon Services LLC Associates Program,
an affiliate advertising program designed to provide a means for us to earn fees by
linking to Amazon.com and affiliated sites


Custom Search

Stained Glass Mil


facebook badge